3-jaw chuck Ø 200 mm, 4-jaw chuck Ø 250 mm, Flat chuck 350 mm, Steady rest, Follower rest, MK3 live center, MK3 dead center, Reducer cone MK5/MK3, thread adjustment, 4 way tool post, halogen lamb, changable threads, Foot padel, Cooling System, Toolkit.
| TECHNICAL SPECIFICATIONS | UNIT | Jetco JML 4110Y Lathe |
| Swing over bed | mm | 410 |
| Swing over carriage | mm | 255 |
| Swing over gap | mm | 580 |
| Bed width | mm | 250 |
| Distance between centers | mm | 1000 |
| Gap length | mm | 190 |
| Spindle nose | D1-6 | |
| Spindle bore diameter | mm | 52 |
| Spindle taper | Morse | 6 |
| Spindle speed steps | 16 | |
| Spindle speed range | rpm | 45-1800 |
| Longitudinal feed rate | mm/rev | 0.05 – 1.7 |
| Cross feed rate | mm/rev | 0.025 – 0.85 |
| Max. longitudinal slide travel | mm | 210 |
| Max. cross slide travel | mm | 140 |
| Tool post size | mm | 20×20 |
| Metric thread pitches (qty) | 39 | |
| Metric thread pitch range | mm | 0.2 – 14 |
| Inch thread pitches (qty) | 45 | |
| Inch thread pitch range | TPI | .2-72 |
| Module thread pitches (qty) | 18 | |
| Module thread pitch range | mm | 0.3-3.5 |
| Diametral pitch threads (qty) | 21 | |
| Diametral pitch range | DP | .8-44 |
| Tailstock quill travel | mm | 120 |
| Tailstock taper | MT4 | |
| Main motor power | kW | 3,3 |
| Coolant pump power | kW | 0,1 |
| Dimensions (LxWxH) | mm | 1940 x 850 x 1.320 |
| Net weight | kg | 1160 |
Copyright © 2026 - Emektar Makina A.Ş. | All Rights Reserved
